Ref. CS 01-00-0 HSP NCS MagiSign (HSP)                                           599 US $ 1 licence for Mac OS X (HASP USB protection key)     Packaging includes : 1 NCS MagiSign CD, 1 USB HSAP protection key (OS X only) NCS MagiSign CD includes : NCS MagiSign 1.5 (english, french, soon spanish, dutch, deutsch, italiaan versions), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), plus some goodies (clip-art, utilities and demo of third party plug-in's).   Cable : To connect a Summacut (USB or SE), a SummagraphicPRO SL, a Graphtec CE-3000 or a Graphtec FC 5100 USB plotter to one of those models of USB Macintosh, you just have to plug a USB cable between your plotter and your computer (don't install any other plotter driver than MagiSign, we provide all you need to plot). To connect any other plotter model from its serial port to those models of USB Macintosh, you need : - one Keyspan Twin Serial USB adapter - the model of serial cable corresponding to the plotter between your plotter and the Keyspan adapter. We keep at your disposal for any further advice

Ref. CS 02-00-S HSP                                               PROMO ! NCS MagiSign (HSP2)                                         799 US $ 2 licences for Mac OS X (HASP USB protection key) + 1 licence MagiSign Server for Mac OS 9   Packaging includes : 1 NCS MagiSign CD, 1 USB HSAP protection key (OS X only) NCS MagiSign CD includes : NCS MagiSign 1.5 (english, french, soon spanish, dutch, deutsch, italiaan versions), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), 1 NCS MagiSign Server licence Mac OS 8.6-9.2.2, plus some goodies (clip-art, utilities and demo of third party plug-in's). NCS MagiSign Server allows to plot in background on a local or a remote Mac used as Plotter Server (this Mac must be booted in OS 9). So you may cut from an older Mac and create from 2 recent models of Mac on OS X. All you have to do is to send file through the network to the Server.   Cable : To connect a Summacut (USB or SE), a SummagraphicPRO SL, a Graphtec CE-3000 or a Graphtec FC 5100 USB plotter to one of those models of USB Macintosh, you just have to plug a USB cable between your plotter and your computer (don't install any other plotter driver than MagiSign, we provide all you need to plot). To connect any other plotter model from its serial port to those models of USB Macintosh, you need : - one Keyspan Twin Serial USB adapter - the model of serial cable corresponding to the plotter between your plotter and the Keyspan adapter. We keep at your disposal for any further advice

The terms of the NCS MagiSign licence are described in the manual. The use of the protection key means agreement with those terms. To be recognised, the USB Microguard dongle required the installation of the USB Microguard Driver in the system folder of your Macintosh.

Ref. CS 00-01-0 MGU                                    LAST UNITS ! NCS MagiSign (MG-U)                                     199 US $ 1 licence for Mac OS 9 (Microguard USB protection key)   Packaging includes : 1 NCS MagiSign CD, 1 USB Microguard protection key (OS 9 only) NCS MagiSign CD includes : NCS MagiSign 1.3.10 (english, spanish, french, dutch, deutsch, italiaan versions), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), plus some goodies (clip-art, utilities and demo of third party plug-in's). Goodies includes cliparts and special promos.   Cable : To connect a Summacut USB plotter to one of those models of USB Macintosh, you have to install the Summa USB driver from our CD and to plug a USB cable between your plotter and your computer To connect any other plotter model through its serial port to those models of USB Macintosh, you need : - one Keyspan Twin Serial USB adapter - the model of serial cable corresponding to the plotter between your plotter and the Keyspan adapter. We keep at your disposal for any further advice

Ref. CS 01-01-S USB                                           PROMO ! NCS MagiSign Duo USB                                  699 US $ MANAGE YOUR EVOLUTION    1 licence for Mac OS 10 (HASP USB protection key) + 1 licence for Mac OS 9 (Microguard USB protection key) + 1 licence MagiSign Server for Mac OS 9   NPackaging includes : 1 NCS MagiSign CD, 1 HASP protection key (OSX) & 1 USB Microguard protection key (OS 9) NCS MagiSign CD includes : NCS MagiSign 1.5 (OS X, english, french) & NCS MagiSign 1.3.10 (0S 9, english, spanish, french, dutch, deutsch, italiaan versions), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), 1 NCS MagiSign Server licence Mac OS 8.6-9.2.2, plus some goodies (clip-art, utilities and demo of third party plug-in's). NCS MagiSign Server allows to plot in background on a local or a remote Mac used as Plotter Server (this Mac must be booted in OS 9). So you may cut from an older Mac and create from a recent model on OS X.   Cable : To connect a Summacut USB plotter to one of those models of USB Macintosh, you have to install the Summa USB driver from our CD and to plug a USB cable between your plotter and your computer To connect any other plotter model through its serial port to those models of USB Macintosh, you need : - one Keyspan Twin Serial USB adapter - the model of serial cable corresponding to the plotter between your plotter and the Keyspan adapter. We keep at your disposal for any further advice

The terms of the NCS MagiSign licence are described in the manual. The use of the protection key means agreement with those terms. To be recognised, the USB Microguard dongle required the installation of the USB Microguard Driver in the system folder of your Macintosh.

Ref. NCS 00-01-0 MGU                                  LAST UNITS ! NCS MagiSign (MG-U)                                     199 US $ 1 licence for Mac OS 9 (Microguard USB protection key)   Packaging includes : 1 NCS MagiSign CD, 1 USB Microguard protection key (OS 9 only) NCS MagiSign CD includes : NCS MagiSign 1.3.10 (english, spanish, french, dutch, deutsch, italiaan versions), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), plus some goodies (clip-art, utilities and demo of third party plug-in's). Goodies includes cliparts and special promos.   Cable : To connect a Summacut USB plotter to one of those models of USB Macintosh, you have to install the Summa USB driver from our CD and to plug a USB cable between your plotter and your computer To connect any other plotter model through its serial port to those models of USB Macintosh, you need : - one Keyspan Twin Serial USB adapter - the model of serial cable corresponding to the plotter between your plotter and the Keyspan adapter. We keep at your disposal for any further advice

Ref. CS 01-01-S USB                                           PROMO ! NCS MagiSign Duo USB                                  699 US $ MANAGE YOUR EVOLUTION       1 licence for Mac OS 10 (HASP USB protection key) + 1 licence for Mac OS 9 (Microguard USB protection key) + 1 licence MagiSign Server for Mac OS 9   NPackaging includes : 1 NCS MagiSign CD, 1 HASP protection key (OSX) & 1 USB Microguard protection key (OS 9) NCS MagiSign CD includes : NCS MagiSign 1.5 (OS X, english, french) & NCS MagiSign 1.3.10 (0S 9, english, spanish, french, dutch, deutsch, italiaan versions), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), 1 NCS MagiSign Server licence Mac OS 8.6-9.2.2, plus some goodies (clip-art, utilities and demo of third party plug-in's). NCS MagiSign Server allows to plot in background on a local or a remote Mac used as Plotter Server (this Mac must be booted in OS 9). So you may cut from an older Mac and create from a recent model on OS X.   Cable : To connect a Summacut USB plotter to one of those models of USB Macintosh, you have to install the Summa USB driver from our CD and to plug a USB cable between your plotter and your computer To connect any other plotter model through its serial port to those models of USB Macintosh, you need : - one Keyspan Twin Serial USB adapter - the model of serial cable corresponding to the plotter between your plotter and the Keyspan adapter. We keep at your disposal for any further advice

The terms of the NCS MagiSign licence are described in the manual. The use of the protection key means agreement with those terms. To be recognised, the USB Microguard dongle required the installation of the USB Microguard Driver in the system folder of your Macintosh.

Ref. CS 00-01-0 ADB                                             LATEST UNIT NCS MagiSign "licence ADB"                                  99 US $ 1 licence for Mac OS 9 (Microguard USB protection key)   Packaging includes : 1 NCS MagiSign CD & 1 Microguard ADB protection key. NCS MagiSign CD includes : NCS MagiSign (english, spanish, french, dutch, deutsch, italiaan), NCS MagiSign manual in PDF format (english, spanish, french, soon translated in dutch, deutsch and italiaan), plus some goodies (clip-art, utilities and demo of third party plug-in's). Cable : A serial corresponding to the model must be plugged between the plotter and the modem port of the Macintosh. We keep at your disposal for advices.

The terms of the NCS MagiSign licence are described in the manual. The use of the protection key means agreement with those terms.

To connect a serial plotter to those models of Macintosh, you need :
- the right model of serial cable between your plotter and your computer

SignofNCS freeware This product and its manual can be download and use free of charge as far *as the customer agrees with the terms of the licence described in the manual. No support will be provided about this product by any way.

wFree to download*

The terms of the licence to use of SignofNCS are described in the manual. The use of SignofNCS means agreement with those terms.

To connect a serial plotter to those models of Macintosh, you need :
- the right model of serial cable between your plotter and your computer

* Adobe Illustrator 5.0 was the first version to offer an open architecture. Some internal bugs don't allows to use it with our product.

The terms of the licence to use of SignofNCS are described in the manual. The use of SignofNCS means agreement with those terms.